Filtre
Affichage de 0-60 de 2 553 résultats pour "ocana"
Lot 15252025 Mustang GRP150 D Rotating Grappin de démolition (Unused)
Ocana, CSTL, ESP
to fit 1.5 - 5.5 ton excavators
Enchères minutées
(Jour 2 de 2)
VENDU
Lot 1512to fit CAT315 •for 10-18 ton excavator • two hoses
Enchères minutées
(Jour 2 de 2)
VENDU
Lot 15702025 Mustang HM1002 Concasseur hydraulique (Unused)
Ocana, CSTL, ESP
to fit 9 - 19 ton excavators
Enchères minutées
(Jour 2 de 2)
VENDU
Enchères minutées
(Jour 2 de 2)
VENDU
Enchères minutées
(Jour 2 de 2)
VENDU
Lot 15262025 Mustang GRP150 Rotating Grappin de démolition (Unused)
Ocana, CSTL, ESP
to fit 1.5 - 5.5 ton excavators
Enchères minutées
(Jour 2 de 2)
VENDU
Enchères minutées
(Jour 2 de 2)
VENDU
Lot 1723Strickland THTHB 2250 mm Godet pour Chariot Élévateur Télescopique - Fits JCB (Unused)
Ocana, CSTL, ESP
2.5cu
Enchères minutées
(Jour 2 de 2)
VENDU
Enchères minutées
(Jour 2 de 2)
VENDU
Lot 17532025 Elephant RIPPER345-E Défonceuse pour excavatrice (Unused)
Ocana, CSTL, ESP
Suitable for KOMATSU/HITACHI/CAT/VOLVO/DAEWOO/John Deere excavator tonne range from 40-49 tons. Weight: 2460 lb. Using Q345 manganese plate steel • high strength and corrosion resistance; The pin is made of 42CrMo alloy steel • with built-in oil passage • high strength and good toughness. Manufactured from high strength steel NM400. Heavy-duty base plate/ Heavy-duty teeth with teeth protector.
Enchères minutées
(Jour 2 de 2)
VENDU
Lot 16082025 Haener HX650SA Concasseur hydraulique (Unused)
Ocana, CSTL, ESP
to suit 3-7 ton Excavator • Copy of declaration of confirmity available • Weight 275 kg
Enchères minutées
(Jour 2 de 2)
VENDU
Lot 16722025 Haener HSL1200 7.10 MS08A Godet (Unused)
Ocana, CSTL, ESP
to suit 7-10 ton excavator • weight 285kg
Enchères minutées
(Jour 2 de 2)
VENDU
Lot 16742025 Haener HSL1000 7.10 P50A Godet (Unused)
Ocana, CSTL, ESP
to suit 7-10 ton excavator • with 50mm Pin System (Pin to Pin 292mm/ wide 232mm) • weight 265kg
Enchères minutées
(Jour 2 de 2)
VENDU
Lot 16732025 Haener HSL1000 7.10 MS08A Skeleton Godet (Unused)
Ocana, CSTL, ESP
to suit 7-10 ton excavator • weight 265kg
Enchères minutées
(Jour 2 de 2)
VENDU
Lot 15992025 Haener HX650A Concasseur hydraulique (Unused)
Ocana, CSTL, ESP
to suit 3-7 ton Excavator • Copy of declaration of confirmity available • Weight 290 kg
Enchères minutées
(Jour 2 de 2)
VENDU
Lot 18372025 Haener HEB1200 Tarière pour excavatrice (Unused)
Ocana, CSTL, ESP
auger bit to fit 1 •5-5 ton excavator • Copy of declaration of conformity available • 80kg +back support HEB1200
Enchères minutées
(Jour 2 de 2)
VENDU
Lot 1722Strickland 2250 mm Godet pour Chariot Élévateur Télescopique - Fits Manitou (Unused)
Ocana, CSTL, ESP
2.0cu
Enchères minutées
(Jour 2 de 2)
VENDU
Enchères minutées
(Jour 2 de 2)
VENDU
Enchères minutées
(Jour 2 de 2)
VENDU
Enchères minutées
(Jour 2 de 2)
VENDU
Lot 16022025 Haener HX600A Concasseur hydraulique (Unused)
Ocana, CSTL, ESP
to suit 3-6 ton Excavator • Copy of declaration of confirmity available • Weight 200 kg
Enchères minutées
(Jour 2 de 2)
VENDU
Lot 15332025 Haener HMZGx4.7A Grappin (Unused)
Ocana, CSTL, ESP
to suit 4-9 ton mini Excavator • Shell width 505mm • Weight 260kg
Enchères minutées
(Jour 2 de 2)
VENDU
Lot 18102025 Haener HEB 6000-A Accessoires de tarière (Unused)
Ocana, CSTL, ESP
to suit 5-10 ton Excavator • Copy of declaration of confirmity available • 110kg
Enchères minutées
(Jour 2 de 2)
VENDU
Lot 18112025 Haener HEB 3500-A Accessoires de tarière (Unused)
Ocana, CSTL, ESP
to suit 3-6 ton Excavator • Copy of declaration of confirmity available • 71kg
Enchères minutées
(Jour 2 de 2)
VENDU
Lot 16802025 Haener HSL800 3.7 P45A Skeleton Godet (Unused)
Ocana, CSTL, ESP
to suit 3-7 ton excavator • with 45mm Pin System (Pin to Pin 305mm/ wide 185mm) • weight 175kg
Enchères minutées
(Jour 2 de 2)
VENDU
Lot 17592025 Haener HRZP80-A Défonceuse pour excavatrice (Unused)
Ocana, CSTL, ESP
with 80mm Pin System • Weight 587kg • to suit 15-25 ton Excavator
Enchères minutées
(Jour 2 de 2)
VENDU
Lot 16782025 Haener HSL800 2.3 P40A Godet (Unused)
Ocana, CSTL, ESP
to suit 2-3 ton excavator • with 40mm Pin System (Pin to Pin 200mm/ wide 135mm) • weight 100kg
Enchères minutées
(Jour 2 de 2)
VENDU
Lot 16012025 Haener HX600SA Concasseur hydraulique (Unused)
Ocana, CSTL, ESP
to suit 3-6 ton Excavator • Copy of declaration of confirmity available • Weight 205 kg
Enchères minutées
(Jour 2 de 2)
VENDU
Lot 2014Enchères minutées
(Jour 2 de 2)
VENDU
Enchères minutées
(Jour 2 de 2)
VENDU
Lot 1524to fit CAT305 • for 4-8 ton excavator • with hoses
Enchères minutées
(Jour 2 de 2)
VENDU
Enchères minutées
(Jour 2 de 2)
VENDU
Lot 17612025 Haener HRZP70-A Défonceuse pour excavatrice (Unused)
Ocana, CSTL, ESP
with 70mm Pin System • Weight 187kg • to suit 15-25 ton Excavator
Enchères minutées
(Jour 2 de 2)
VENDU
Lot 15422025 Haener HMZGx2.4A Grappin (Unused)
Ocana, CSTL, ESP
to suit 2-5 ton mini Excavator • Shell width 405mm • Weight 143kg
Enchères minutées
(Jour 2 de 2)
VENDU
Lot 17552025 Elephant RIPPER336D-ES Défonceuse pour excavatrice (Unused)
Ocana, CSTL, ESP
Suitable for KOMATSU/HITACHI/CAT/VOLVO/DAEWOO/John Deere excavator tonne range from 30-38 tons. Weight: 1640 lb. Using Q345 manganese plate steel • high strength and corrosion resistance; The pin is made of 42CrMo alloy steel • with built-in oil passage • high strength and good toughness. Manufactured from high strength steel NM400. Heavy-duty base plate/ Heavy-duty teeth with teeth protector.
Enchères minutées
(Jour 2 de 2)
VENDU
Lot 15682025 Mustang HM550 Concasseur hydraulique (Unused)
Ocana, CSTL, ESP
to fit 5.2 - 11.5 ton excavators
Enchères minutées
(Jour 2 de 2)
VENDU
Lot 1514to fit CAT305 •for 4-7 ton excavator • two hoses
Enchères minutées
(Jour 2 de 2)
VENDU
Lot 1513to fit CAT305 •for 4-7 ton excavator • two hoses
Enchères minutées
(Jour 2 de 2)
VENDU
Lot 15542025 Haener HSG1500 Grappin de démolition (Unused)
Ocana, CSTL, ESP
to fit 20-30 ton mini excavator • operating pressure open/closed: 250-280 bar • min. oil volume open/closed: 70-90 l/min • opening width 2100mm • weight 1395kg
Enchères minutées
(Jour 2 de 2)
VENDU
Enchères minutées
(Jour 2 de 2)
VENDU
Lot 15522025 Haener HSG1300 Grappin de démolition (Unused)
Ocana, CSTL, ESP
to fit 20-28 ton mini excavator • operating pressure open/closed: 250-280 bar • min. oil volume open/closed: 60-80 l/min • opening width 1950mm • weight 1275kg
Enchères minutées
(Jour 2 de 2)
VENDU
Lot 15152025 Haener HSG500 Grappin de démolition (Unused)
Ocana, CSTL, ESP
to fit 7 •5-10 ton mini excavator • operating pressure open/closed: 200-240 bar • min. oil volume open/closed: 25-35 l/min • opening width 1550mm • weight 429kg
Enchères minutées
(Jour 2 de 2)
VENDU
Lot 15532025 Haener HSG800 Grappin de démolition (Unused)
Ocana, CSTL, ESP
to fit 16-24 ton mini excavator • operating pressure open/closed: 220-260 bar • min. oil volume open/closed: 60-80 l/min • opening width 1850mm • weight 820kg
Enchères minutées
(Jour 2 de 2)
VENDU
Lot 15782025 Elephant EPB900B-E Concasseur hydraulique (Unused)
Ocana, CSTL, ESP
Suitable for KOMATSU/HITACHI/CAT/VOLVO/DAEWOO/John Deere excavator tonne range from 11-16 tons. Chisel Dia:100mm •weight:1984lb.Includes: 1 circuit breaker • 100mm chisel • 2 oil hoses • 1 set of nitrogen cylinder nitrogen production device • 1 pressure gauge • 1 set of toolbox and necessary maintenance tools. The reinforcement plate of the hammer shellis lengthened to enhance its firmness
Enchères minutées
(Jour 2 de 2)
VENDU
Enchères minutées
(Jour 2 de 2)
VENDU
Enchères minutées
(Jour 2 de 2)
VENDU
Lot 15872024 Elephant EPB430BL-E Concasseur hydraulique (Unused)
Ocana, CSTL, ESP
Suitable for KOMATSU/HITACHI/CAT/VOLVO/DAEWOO/John Deere excavator tonne range from5-9 tons. Chisel Dia:75mm •weight:776lb.Includes: 1 circuit breaker • 75mm chisel • 2 oil hoses • 1 set of nitrogen cylinder nitrogen production device • 1 pressure gauge • 1 set of toolbox and necessary maintenance tools. The reinforcement plate of the hammer shellis lengthened to enhance its firmness
Enchères minutées
(Jour 2 de 2)
VENDU
Enchères minutées
(Jour 2 de 2)
VENDU
Enchères minutées
(Jour 2 de 2)
VENDU
Enchères minutées
(Jour 2 de 2)
VENDU
Enchères minutées
(Jour 2 de 2)
VENDU
Lot 1626silence type • for 7-9ton excavator • all new TOFT hydraulic breaker are supplied with two Moil-type chisel • two hoses • one Set Of N2 Nitrogen Charging Kit With N2 Bottle And Pressure Gauge • Toil Box With Maintenance Tools And Operations Manual
Enchères minutées
(Jour 2 de 2)
VENDU
Lot 1627silence type • for 7-9ton excavator • all new TOFT hydraulic breaker are supplied with two Moil-type chisel • two hoses • one Set Of N2 Nitrogen Charging Kit With N2 Bottle And Pressure Gauge • Toil Box With Maintenance Tools And Operations Manual
Enchères minutées
(Jour 2 de 2)
VENDU
Lot 16042025 Haener HX500SA Concasseur hydraulique (Unused)
Ocana, CSTL, ESP
to suit 2-5 ton Excavator • Copy of declaration of confirmity available • Weight 170 kg
Enchères minutées
(Jour 2 de 2)
VENDU
Lot 15502025 Haener HMZGX1.3A + Rotator Grappin (Unused)
Ocana, CSTL, ESP
to suit 1-3 ton mini Excavator • Shell width 350mm • Weight 86kg
Enchères minutées
(Jour 2 de 2)
VENDU
Lot 16772025 Haener HSL800 2.3 P35A Godet (Unused)
Ocana, CSTL, ESP
to suit 2-3 ton excavator • with 35mm Pin System (Pin to Pin 165mm/ wide 135mm) • weight 100kg
Enchères minutées
(Jour 2 de 2)
VENDU
Lot 16762025 Haener HSL800 2.3 P50A Skeleton Godet (Unused)
Ocana, CSTL, ESP
to suit 2-3 ton excavator • weight 100kg
Enchères minutées
(Jour 2 de 2)
VENDU
Lot 16822025 Haener HSL1000 3.7 P45A Skeleton Godet (Unused)
Ocana, CSTL, ESP
to suit 3-7 ton excavator • with 45mm Pin System (Pin to Pin 305mm/ wide 185mm) • weight 200kg
Enchères minutées
(Jour 2 de 2)
VENDU
Lot 15512025 Haener HMZGx1.3A Grappin (Unused)
Ocana, CSTL, ESP
to suit 1-3 ton mini Excavator • Shell width 350mm • Weight 86kg
Enchères minutées
(Jour 2 de 2)
VENDU
2161-2220 of 2553
