Équipements agricoles à vendre

EQUIPMENT-FROM-TRAM-SALES

Single speed gearbox with 540 rpm PTO •Rotor revolutions: 208 rpm •PTO shaft with slip clutch (1-3/8" Z6 tractor side yoke) •Side chain drive in oil bath •Universal three point hitch: Cat I II •Centre offset mounting is standard •6 blades per flange • EQUIPMENT-FROM-TRAM-SALES

Single speed gearbox with 540 rpm PTO •Rotor revolutions: 208 rpm •PTO shaft with slip clutch (1-3/8" Z6 tractor side yoke) •Side chain drive in oil bath •Universal three point hitch: Cat I II •Centre offset mounting is standard •6 blades per flange • EQUIPMENT-FROM-TRAM-SALES

Single speed gearbox with 540 rpm PTO •Rotor revolutions: 208 rpm •PTO shaft with slip clutch (1-3/8" Z6 tractor side yoke) •Side chain drive in oil bath •Universal three point hitch: Cat I II •Centre offset mounting is standard •6 blades per flange • EQUIPMENT-FROM-TRAM-SALES

Multispeed Gearbox 540 rpm PTO • Rotor revolutions (4 speed): 178-201-227-256 • PTO shaft with slip clutch (1-3/8" Z6 tractor side yoke) • Side gear drive in oil bath • Universal three point hitch • Cat I+II • Will offset 8" to the right • 6 blades per flange (side blades are always mounted inwards) • EQUIPMENT-FROM-TRAM-SALES

2-3/8 in Tubing • THE PRODUCT IMAGES SHOWN ARE FOR ILLUSTRATION PURPOSES ONLY AND MAY NOT BE AN EXACT REPRESENTATION OF THE ACTUAL PRODUCT

2-3/8 in Tubing • THE PRODUCT IMAGES SHOWN ARE FOR ILLUSTRATION PURPOSES ONLY AND MAY NOT BE AN EXACT REPRESENTATION OF THE ACTUAL PRODUCT

2-3/8 in Tubing • THE PRODUCT IMAGES SHOWN ARE FOR ILLUSTRATION PURPOSES ONLY AND MAY NOT BE AN EXACT REPRESENTATION OF THE ACTUAL PRODUCT

2-3/8 in Tubing • THE PRODUCT IMAGES SHOWN ARE FOR ILLUSTRATION PURPOSES ONLY AND MAY NOT BE AN EXACT REPRESENTATION OF THE ACTUAL PRODUCT

2-3/8 in Tubing • THE PRODUCT IMAGES SHOWN ARE FOR ILLUSTRATION PURPOSES ONLY AND MAY NOT BE AN EXACT REPRESENTATION OF THE ACTUAL PRODUCT

2-3/8 in Tubing • THE PRODUCT IMAGES SHOWN ARE FOR ILLUSTRATION PURPOSES ONLY AND MAY NOT BE AN EXACT REPRESENTATION OF THE ACTUAL PRODUCT

540 PTO

Multispeed Gearbox 540 rpm PTO •Rotor revolutions (4 speed): 140-174-215-266 •Slip clutch PTO shaft (1-3/8" Z6 tractor side yoke) •Heavy-duty rotor hub •Side gear drive in oil bath •Universal three point hitch • Cat I+II •Will offset 8" to the right •6 blades per flange (side blades are always mounted inwards) •Long multi-bends rear levelling doors with down-pressure double springs •Pair of skids •Oversize rotor Ø 22 in. with high strength steel flanges (B-super model only) •New flank for deeper tillage (B-super model only) •Hardened-steel antiwear skids (B-super model only). EQUIPMENT-FROM-TRAM-SALES

Single speed gearbox with 540 rpm PTO •Rotor revolution 290 rpm •PTO shaft with shear pin (1" 3/8 Z6 tractor side yoke) •PTO shaft with slip clutch (optional) •Leveling bar (optional) •Round blade-holders •2 blades per rotor •Strengthened 6mm housing transmission • high strength steel •Cat. I (Models 1300-1500) • Cat. II (Models 1800-2000) •3 pt hitch •Hitch will offset •Side dampened protection •Depth control by 15" cage roller with pin adjustment • EQUIPMENT-FROM-TRAM-SALES

540/1000 rpm PTO gearbox •Rotor revolutions PTO 540 rpm (3 speed): 133-162-220 •Rotor revolutions PTO 1000 rpm (3 speed): 181-246-300 •CONDOR spike rotor and cage roller with leveling bar •PTO shaft with slip clutch •1-3/8" Z6 tractor side yoke for 540 rpm PTO •1-3/8" Z21 tractor side yoke for 1000 rpm PTO •Side gears drive in oil bath •Universal three point hitch • cat. II •Swinging front hitches for leveling and balancing rough land •Shield spring adjusters •Pair of skids •Heavy duty barrel type bearings •"Duo cone" waterproof sealings • oil bath lubrication • EQUIPMENT-FROM-TRAM-SALES

540/1000 rpm PTO gearbox •Rotor revolutions 540 rpm PTO (4 speed): 175-214-262-143 •Rotor revolutions 1000 rpm PTO (2 speed): 324-356 •Slip clutch PTO shaft: 1-3/8" Z6 tractor side yoke with 540 rpm PTO 1-3/8" Z21 tractor side yoke with 1000 rpm PTO •Heavy-duty rotor hub •Side gear drive in oil bath •Universal three point hitch • Cat II •Offset front bar hitches •6 blades per flange (side blades are always mounted inwards) •Long multi-bends rear levelling doors with down-pressure double springs •Pair of skids • EQUIPMENT-FROM-TRAM-SALES

EQUIPMENT-FROM-TRAM-SALES

2-3/8 in Tubing • THE PRODUCT IMAGES SHOWN ARE FOR ILLUSTRATION PURPOSES ONLY AND MAY NOT BE AN EXACT REPRESENTATION OF THE ACTUAL PRODUCT

2-3/8 in Tubing • THE PRODUCT IMAGES SHOWN ARE FOR ILLUSTRATION PURPOSES ONLY AND MAY NOT BE AN EXACT REPRESENTATION OF THE ACTUAL PRODUCT

2-3/8 in Tubing • THE PRODUCT IMAGES SHOWN ARE FOR ILLUSTRATION PURPOSES ONLY AND MAY NOT BE AN EXACT REPRESENTATION OF THE ACTUAL PRODUCT

2-3/8 in Tubing • THE PRODUCT IMAGES SHOWN ARE FOR ILLUSTRATION PURPOSES ONLY AND MAY NOT BE AN EXACT REPRESENTATION OF THE ACTUAL PRODUCT

2-3/8 in Tubing • THE PRODUCT IMAGES SHOWN ARE FOR ILLUSTRATION PURPOSES ONLY AND MAY NOT BE AN EXACT REPRESENTATION OF THE ACTUAL PRODUCT

2-3/8 in Tubing • THE PRODUCT IMAGES SHOWN ARE FOR ILLUSTRATION PURPOSES ONLY AND MAY NOT BE AN EXACT REPRESENTATION OF THE ACTUAL PRODUCT

Cat I • 3 pt. hitch •Single speed gearbox with 540 rpm PTO •Side chain drive in oil bath •PTO shaft with slip clutch •6 blades per flange •Outward turning blades • EQUIPMENT-FROM-TRAM-SALES

Cat I • 3 pt. hitch •Single speed gearbox with 540 rpm PTO •Side chain drive in oil bath •PTO shaft with slip clutch •6 blades per flange •Outward turning blades • EQUIPMENT-FROM-TRAM-SALES

Cat I • 3 pt. hitch •Single speed gearbox with 540 rpm PTO •Side chain drive in oil bath •PTO shaft with slip clutch •6 blades per flange •Outward turning blades • EQUIPMENT-FROM-TRAM-SALES

Cat I • 3 pt. hitch •Single speed gearbox with 540 rpm PTO •Side chain drive in oil bath •PTO shaft with slip clutch •6 blades per flange •Outward turning blades • EQUIPMENT-FROM-TRAM-SALES

Single speed gearbox with 540 rpm PTO •Rotor revolutions: 208 rpm •PTO shaft with slip clutch (1-3/8" Z6 tractor side yoke) •Side chain drive in oil bath •Universal three point hitch: Cat I II •Centre offset mounting is standard •6 blades per flange • EQUIPMENT-FROM-TRAM-SALES

24 in Notched Front Discs • 24 in Rear Discs • 11 in Spacing

540 PTO

Multispeed Gearbox 540 rpm PTO •Rotor revolutions (4 speed): 178-201-227-256 •PTO shaft with slip clutch (1-3/8" Z6 tractor side yoke) •Side gear drive in oil bath •Universal three point hitch • Cat I II •Will offset 8" to the right •6 blades per flange (side blades are always mounted inwards) • EQUIPMENT-FROM-TRAM-SALES

Multispeed Gearbox 540 rpm PTO •Rotor revolutions (4 speed): 178-201-227-256 •PTO shaft with slip clutch (1-3/8" Z6 tractor side yoke) •Side gear drive in oil bath •Universal three point hitch • Cat I II •Will offset 8" to the right •6 blades per flange (side blades are always mounted inwards). EQUIPMENT-FROM-TRAM-SALES

540 PTO • Multispeed Gearbox 540 rpm PTO •Rotor revolutions (4 speed): 178-201-227-256 •PTO shaft with slip clutch (1-3/8" Z6 tractor side yoke) •Side gear drive in oil bath •Universal three point hitch • Cat I II •Will offset 8" to the right •6 blades per flange (side blades are always mounted inwards). EQUIPMENT-FROM-TRAM-SALES

540 PTO • Multispeed Gearbox 540 rpm PTO •Rotor revolutions (4 speed): 178-201-227-256 •PTO shaft with slip clutch (1-3/8" Z6 tractor side yoke) •Side gear drive in oil bath •Universal three point hitch • Cat I II •Will offset 8" to the right •6 blades per flange (side blades are always mounted inwards). EQUIPMENT-FROM-TRAM-SALES

540 PTO • Multispeed Gearbox 540 rpm PTO •Rotor revolutions (4 speed): 178-201-227-256 • PTO shaft with slip clutch (1-3/8" Z6 tractor side yoke) • Side gear drive in oil bath • Universal three point hitch • Cat I II •Will offset 8" to the right •6 blades per flange (side blades are always mounted inwards). EQUIPMENT-FROM-TRAM-SALES

6 "L" blades per flange mounted in spiral line (for normal soils) •Standard rotor (with end blades turned outwards) •1-speed gearbox made by SICMA with conical roller bearings •Side chain drive in oil bath with automatic chain tensioner and sight glass •Lower 3rd point hitches with adjustable width • will offset to the right •Adjustable side skids to determine the desired working depth •Parking stand •Cat I • 3 point hitch •PTO shaft size 4 (Eurocardan) with Slip Clutch protection •Polyester powder coating system • EQUIPMENT-FROM-TRAM-SALES

6 curved blades per flange mounted in spiral line (for normal soils) •Standard rotor (with end blades turned outwards) •Single or 4-speed gearbox made by SICMA with conical roller bearings • and oil level indicator •Side gear drive in oil bath with sight glass •Lower 3rd point hitches with adjustable width •Adjustable side skids to control the desired working depth •Parking stand •Cat 1 and 2 • 3 point hitch •PTO shaft size 6 (Eurocardan) with Slip Clutch protection •Polyester powder coating system •Box frame •"Long life"HD seal provided inside the rotor's bearings. EQUIPMENT-FROM-TRAM-SALES

6 curved blades per flange mounted in spiral line (for normal soils) •Standard rotor (with end blades turned outwards) •Single or 4-speed gearbox made by SICMA with conical roller bearings • and oil level indicator •Side gear drive in oil bath with sight glass •Lower 3rd point hitches with adjustable width •Adjustable side skids to control the desired working depth •Parking stand •Cat 1 and 2 • 3 point hitch •PTO shaft size 6 (Eurocardan) with Slip Clutch protection •Polyester powder coating system •Box frame •"Long life"HD seal provided inside the rotor's bearings. EQUIPMENT-FROM-TRAM-SALES

6 curved blades per flange mounted in spiral line (for normal soils) •Standard rotor (with end blades turned outwards) •Single or 4-speed gearbox made by SICMA with conical roller bearings • and oil level indicator •Side gear drive in oil bath with sight glass •Lower 3rd point hitches with adjustable width •Adjustable side skids to control the desired working depth •Parking stand •Cat 1 and 2 • 3 point hitch •PTO shaft size 6 (Eurocardan) with Slip Clutch protection •Polyester powder coating system •Box frame •"Long life"HD seal provided inside the rotor's bearings. EQUIPMENT-FROM-TRAM-SALES

(2) Gates • THE PRODUCT IMAGES SHOWN ARE FOR ILLUSTRATION PURPOSES ONLY AND MAY NOT BE AN EXACT REPRESENTATION OF THE ACTUAL PRODUCT

2 or 4 rotors • 6 tines per rotor •3pt hitch or drawbar versions •slip clutch PTO •hydraulic folding (on RT 5800 model) •parking stand •flotation tires 16x6.50 - 8 ply •operating speed - 16 km/hour • EQUIPMENT-FROM-TRAM-SALES

EQUIPMENT-FROM-TRAM-SALES

Hydraulic Swing Arm