Équipements de travail du sol À vendre

22 in Notched Front Discs • 22 in Deep Cone Rear Discs • Hydraulic Parking Jack

Notched Front Discs • Notched Rear Discs • THE PRODUCT IMAGES SHOWN ARE FOR ILLUSTRATION PURPOSES ONLY AND MAY NOT BE AN EXACT REPRESENTATION OF THE ACTUAL PRODUCT

Notched Front Discs • Notched Rear Discs • THE PRODUCT IMAGES SHOWN ARE FOR ILLUSTRATION PURPOSES ONLY AND MAY NOT BE AN EXACT REPRESENTATION OF THE ACTUAL PRODUCT

Notched Rear Discs • 9 in Spacing

540 PTO

540 PTO

20 Tines • 12 in Spacing • C-Shanks • Rear Harrow

Max Width 97 in

W/ Poly Tank

540 PTO

540 PTO

540 PTO

12 in Spacing • C-Shanks • Sweeps • Rear Harrow • Valmar 2055 Granular Package • Valmar Control

PTO Driven • 11-15 Tires

4 Bar • 3/8 in x 13 in Tines • Coil Packer

35 in Blade • Countour Disk

3 Point Hitch • 12 in Spacing • Rear Tines

21 in Notched Front Discs • 21 in Notched Rear Discs • 9 in Spacing • Roller Cage

42 in Drum Diameter • 1/2 in Drum Wall Thickness

1000 PTO • Maxipacker Roller Bar

23 in Notched Front Discs • 23 in Smooth Rear Discs • 9 in Spacing • Mud Scrapers

32 in Drum Diameter • 1/2 in Drum Wall Thickness

Hydraulic Tine Adjustment • 5 Bar • 9/16 in x 24 in Tines • Valmar 3255 Granular Applicator • 16.5-16.5 Tires

35 Bar • x 24 in Tines

EQUIPMENT-FROM-TRAM-SALES

Hydraulic Drive

Single speed gearbox with 540 rpm PTO •Rotor revolution 290 rpm •PTO shaft with shear pin (1" 3/8 Z6 tractor side yoke) •PTO shaft with slip clutch (optional) •Leveling bar (optional) •Round blade-holders •2 blades per rotor •Strengthened 6mm housing transmission • high strength steel •Cat. I (Models 1300-1500) • Cat. II (Models 1800-2000) •3 pt hitch •Hitch will offset •Side dampened protection •Depth control by 15" cage roller with pin adjustment • EQUIPMENT-FROM-TRAM-SALES

24 in Notched Front Discs • 24 in Smooth Rear Discs • 9 in Spacing

540/1000 rpm PTO gearbox •Pair of standard gears: 17-23 •Rotor revolution PTO 540 rpm (2speed): 193-353 •Rotor revolution PTO 1000 rpm (1speed): 357 •Round blade-holders •Heavy duty gear-tray with double reinforcement •Universal three point hitch • cat. II •Swinging front hitches •PTO shaft with slip clutch (1-3/8" Z6 for tractor 540 rpm PTO) is standard •PTO shaft with slip clutch (1-3/8" Z21 for 1000 rpm PTO) is optional •Rear cage roller standard (packer roller is optional) •Rear PTO •Rear levelling bar with mechanical central adjuster standard •2 blades per rotor • EQUIPMENT-FROM-TRAM-SALES

Single speed gearbox with 540 rpm PTO •Rotor revolution 290 rpm •PTO shaft with shear pin (1" 3/8 Z6 tractor side yoke) •PTO shaft with slip clutch (optional) •Leveling bar (optional) •Round blade-holders •2 blades per rotor •Strengthened 6mm housing transmission • high strength steel •Cat. I (Models 1300-1500) • Cat. II (Models 1800-2000) •3 pt hitch •Hitch will offset •Side dampened protection •Depth control by 15" cage roller with pin adjustment • EQUIPMENT-FROM-TRAM-SALES

Single speed gearbox with 540 rpm PTO •Rotor revolution 290 rpm •PTO shaft with shear pin (1" 3/8 Z6 tractor side yoke) •PTO shaft with slip clutch (optional) •Leveling bar (optional) •Round blade-holders •2 blades per rotor •Strengthened 6mm housing transmission • high strength steel •Cat. I (Models 1300-1500) • Cat. II (Models 1800-2000) •3 pt hitch •Hitch will offset •Side dampened protection •Depth control by 15" cage roller with pin adjustment •EQUIPMENT-FROM-TRAM-SALES

540/1000 rpm PTO gearbox •Pair of standard gears: 17-23 •Rotor revolution PTO 540 rpm (2speed): 193-353 •Rotor revolution PTO 1000 rpm (1speed): 357 •Round blade-holders •Quick blade release •Heavy duty gear-tray with double reinforcement •Universal three point hitch • cat. II •Swinging front hitches •PTO shaft with slip clutch (1-3/8" Z6 for tractor 540 rpm PTO) is standard •PTO shaft with slip clutch (1-3/8" Z21 for tractor 1000 rpm PTO) is optional •Rear roller pin depth adjustment •Rear PTO •Rear levelling bar with mechanical central adjuster •2 blades per rotor •long dampened side protections • EQUIPMENT-FROM-TRAM-SALES

1000 PTO • 540/1000 rpm PTO gearbox •Pair of standard gears: 17-23 •Rotor revolution PTO 540 rpm (2speed): 193-353 •Rotor revolution PTO 1000 rpm (1speed): 357 •Round blade-holders •Quick blade release •Heavy duty gear-tray with double reinforcement •Universal three point hitch • cat. II •Swinging front hitches •PTO shaft with slip clutch (1-3/8" Z6 for tractor 540 rpm PTO) is standard •PTO shaft with slip clutch (1-3/8" Z21 for tractor 1000 rpm PTO) is optional •Rear roller pin depth adjustment •Rear PTO •Rear levelling bar with mechanical central adjuster •2 blades per rotor •long dampened side protections • EQUIPMENT-FROM-TRAM-SALES

Single speed gearbox with 540 rpm PTO •Rotor revolution 290 rpm •PTO shaft with shear pin (1" 3/8 Z6 tractor side yoke) •PTO shaft with slip clutch (optional) •Leveling bar (optional) •Round blade-holders •2 blades per rotor •Strengthened 6mm housing transmission • high strength steel •Cat. I (Models 1300-1500) • Cat. II (Models 1800-2000) •3 pt hitch •Hitch will offset •Side dampened protection •Depth control by 15" cage roller with pin adjustment • EQUIPMENT-FROM-TRAM-SALES

Single speed gearbox with 540 rpm PTO •Rotor revolution 290 rpm •PTO shaft with shear pin (1" 3/8 Z6 tractor side yoke) •PTO shaft with slip clutch (optional) •Leveling bar (optional) •Round blade-holders •2 blades per rotor •Strengthened 6mm housing transmission • high strength steel •Cat. I (Models 1300-1500) • Cat. II (Models 1800-2000) •3 pt hitch •Hitch will offset •Side dampened protection •Depth control by 15" cage roller with pin adjustment • EQUIPMENT-FROM-TRAM-SALES

Single speed gearbox with 540 rpm PTO •Rotor revolution 290 rpm •PTO shaft with shear pin (1" 3/8 Z6 tractor side yoke) •PTO shaft with slip clutch (optional) •Leveling bar (optional) •Round blade-holders •2 blades per rotor •Strengthened 6mm housing transmission • high strength steel •Cat. I (Models 1300-1500) • Cat. II (Models 1800-2000) •3 pt hitch •Hitch will offset •Side dampened protection •Depth control by 15" cage roller with pin adjustment • EQUIPMENT-FROM-TRAM-SALES

25 Bar • x 24 in Tines • Valmar 2420 Applicator

Single speed gearbox with 540 rpm PTO •Rotor revs 352 rpm •PTO shaft with shear pin (1-3/8" Z6 tractor side yoke) •Strengthened 6mm housing transmission • high strength steel •Universal three point hitch • cat. II •Rear roller central adjustment for depth control •Round blade-holders •Hitch will offset •Depth control by 18" cage roller with central adjustment •2 blades per rotor. EQUIPMENT-FROM-TRAM-SALES

Single speed gearbox with 540 rpm PTO •Rotor revolution: 290 rpm •PTO shaft with shear pin (1-3/8" Z6 tractor side yoke) •Tubular transmission in oil bath •Hardened and tempered blade holders •2 blades per rotor ("U" shaped blades) •Blades replacement with just one nut •Universal three point hitch • Cat. I •Rear roller pin adjustment •Side guards without protrusions to protect plants EQUIPMENT-FROM-TRAM-SALES

Single speed gearbox with 540 rpm PTO •Rotor revs 352 rpm •PTO shaft with shear pin (1-3/8" Z6 tractor side yoke) •Strengthened 6mm housing transmission • high strength steel •Universal three point hitch • cat. II •Rear roller central adjustment for depth control •Round blade-holders •Hitch will offset •Depth control by 18" cage roller with central adjustment •2 blades per rotor • EQUIPMENT-FROM-TRAM-SALES

Single speed gearbox with 540 rpm PTO •Rotor revolution 290 rpm •PTO shaft with shear pin (1" 3/8 Z6 tractor side yoke) •PTO shaft with slip clutch (optional) •Leveling bar (optional) •Round blade-holders •2 blades per rotor •Strengthened 6mm housing transmission • high strength steel •Cat. I (Models 1300-1500) • Cat. II (Models 1800-2000) •3 pt hitch •Hitch will offset •Side dampened protection •Depth control by 15" cage roller with pin adjustment • EQUIPMENT-FROM-TRAM-SALES

EQUIPMENT-FROM-TRAM-SALES

42 in Drum Diameter • 5/8 in Drum Wall Thickness • Valmar Factory Installed Seed Applicator • 2 Sets of Extra Rollers • Patented Leveling Blade • 10 Ply Highway Trailer Tires​ • Acre Counter (with steel protective shroud) • Sectional Control • Monitor • Cables • Chain • Operator Manuals

Single speed gearbox with 540 rpm PTO •Rotor revolution 290 rpm •PTO shaft with shear pin (1" 3/8 Z6 tractor side yoke) •PTO shaft with slip clutch (optional) •Leveling bar (optional) •Round blade-holders 2 blades per rotor •Strengthened 6mm housing transmission • high strength steel •Cat. I (Models 1300-1500) • Cat. II (Models 1800-2000) •3 pt hitch •Hitch will offset •Side dampened protection •Depth control by 15" cage roller with pin adjustment • EQUIPMENT-FROM-TRAM-SALES

6 curved blades per flange mounted in spiral line (for normal soils) •Standard rotor (with end blades turned outwards) •4-speeds (@540 rpm) + 2-speeds (@1000 rpm) gearbox made by SICMA with conical roller bearings and oil level indicator •Side gear drive in oil bath with sight glass •Lower 3rd point hitches with swinging movement •Adjustable side skids to control the desired working depth •Parking stand •Cat 2 • 3 point hitch •PTO shaft size 8 (Eurocardan) with Slip Clutch protection •Box frame •"Long life" HD seal provided inside the rotor's bearings •Polyester powder coating system • EQUIPMENT-FROM-TRAM-SALES

6 curved blades per flange mounted in spiral line (for normal soils) •Standard rotor (with end blades turned outwards) •4-speeds (@540 rpm) + 2-speeds (@1000 rpm) gearbox made by SICMA with conical roller bearings and oil level indicator •Side gear drive in oil bath with sight glass •Lower 3rd point hitches with swinging movement •Adjustable side skids to control the desired working depth •Parking stand •Cat 2 • 3 point hitch •PTO shaft size 8 (Eurocardan) with Slip Clutch protection •Box frame •"Long life" HD seal provided inside the rotor's bearings •Polyester powder coating system • EQUIPMENT-FROM-TRAM-SALES

6 curved blades per flange mounted in spiral line (for normal soils) •Standard rotor (with end blades turned inwards) •2-speeds (@540 rpm) or 2-speeds (@1000 rpm) gearbox made by SICMA with conical roller bearings and oil level indicator •Side gear drive in oil bath with sight glass •Lower 3rd point hitches with swinging movement •Adjustable side skids to control the desired working depth •Parking stand •Cat II and III • 3 point hitch •Box frame •PTO shaft size 8 (Eurocardan) with slip clutch •"Long life" HD seal provided inside the rotor's bearings •Polyester powder coating system • EQUIPMENT-FROM-TRAM-SALES

6 curved blades per flange mounted in spiral line (for normal soils) •Standard rotor (with end blades turned outwards) •4-speeds (@540 rpm) + 2-speeds (@1000 rpm) gearbox made by SICMA with conical roller bearings and oil level indicator •Side gear drive in oil bath with sight glass •Lower 3rd point hitches with swinging movement •Adjustable side skids to control the desired working depth •Parking stand •Cat 2 • 3 point hitch •PTO shaft size 8 (Eurocardan) with Slip Clutch protection •Box frame •"Long life" HD seal provided inside the rotor's bearings •Polyester powder coating system. EQUIPMENT-FROM-TRAM-SALES

Multispeed Gearbox 540 rpm PTO • Rotor revolutions (4 speed): 140-174-215-266 • Slip clutch PTO shaft (1-3/8" Z6 tractor side yoke) • Heavy-duty rotor hub • Side gear drive in oil bath • Universal three point hitch • Cat I II • Will offset 8" to the right • 6 blades per flange (side blades are always mounted inwards) • Long multi-bends rear levelling doors with down-pressure double springs • Pair of skids • Oversize rotor Ø 22 in. with high strength steel flanges (B-super model only) • New flank for deeper tillage (B-super model only) • Hardened-steel antiwear skids (B-super model only) • EQUIPMENT-FROM-TRAM-SALES

Single speed gearbox with 540 rpm PTO •Rotor revolution 215 rpm •PTO shaft with slip clutch(1-3/8" Z6 tractor side yoke) •Side gears drive in oil bath •Universal three point hitch: Cat I II •Will offset 8" to the right •6 blades per flange (side blades are always mounted inwards) • EQUIPMENT-FROM-TRAM-SALES