Équipements de travail du sol À vendre

Single speed gearbox with 540 rpm PTO •Rotor revolution 215 rpm •PTO shaft with slip clutch(1-3/8" Z6 tractor side yoke) •Side gears drive in oil bath •Universal three point hitch: Cat I II •Will offset 8" to the right •6 blades per flange (side blades are always mounted inwards) • EQUIPMENT-FROM-TRAM-SALES

Single speed gearbox with 540 rpm PTO •Rotor revolution 215 rpm •PTO shaft with slip clutch(1-3/8" Z6 tractor side yoke) •Side gears drive in oil bath •Universal three point hitch: Cat I II •Will offset 8" to the right •6 blades per flange (side blades are always mounted inwards) • EQUIPMENT-FROM-TRAM-SALES

6 curved blades per flange mounted in spiral line (for normal soils) •Standard rotor (with end blades turned outwards) •Single or 4-speed gearbox made by SICMA with conical roller bearings • and oil level indicator •Side gear drive in oil bath with sight glass •Lower 3rd point hitches with adjustable width •Adjustable side skids to control the desired working depth •Parking stand •Cat 1 and 2 • 3 point hitch •PTO shaft size 6 (Eurocardan) with Slip Clutch protection •Polyester powder coating system •Box frame •"Long life"HD seal provided inside the rotor's bearings. EQUIPMENT-FROM-TRAM-SALES

540 PTO • 6 curved blades per flange mounted in spiral line (for normal soils) •Standard rotor (with end blades turned outwards) •4-speeds (@540 rpm) 2-speeds (@1000 rpm) gearbox made by SICMA with conical roller bearings and oil level indicator •Side gear drive in oil bath with sight glass •Lower 3rd point hitches with swinging movement •Adjustable side skids to control the desired working depth •Parking stand •Cat 2 • 3 point hitch •PTO shaft size 8 (Eurocardan) with Slip Clutch protection •Box frame •"Long life" HD seal provided inside the rotor's bearings •Polyester powder coating system • EQUIPMENT-FROM-TRAM-SALES

6 "L" blades per flange mounted in spiral line (for normal soils) •Standard rotor (with end blades turned outwards) •1-speed gearbox made by SICMA with conical roller bearings •Side chain drive in oil bath with automatic chain tensioner and sight glass •Lower 3rd point hitches with adjustable width • will offset to the right •Adjustable side skids to determine the desired working depth •Parking stand •Cat I • 3 point hitch •PTO shaft size 4 (Eurocardan) with Slip Clutch protection •Polyester powder coating system • EQUIPMENT-FROM-TRAM-SALES

6 curved blades per flange mounted in spiral line (for normal soils) • Standard rotor (with end blades turned inwards) • 2-speeds (@540 rpm) or 2-speeds (@1000 rpm) gearbox made by SICMA with conical roller bearings and oil level indicator • Side gear drive in oil bath with sight glass • Lower 3rd point hitches with swinging movement • Adjustable side skids to control the desired working depth • Parking stand • Cat II and III • 3 point hitch • Box frame • PTO shaft size 8 (Eurocardan) with slip clutch • "Long life" HD seal provided inside the rotor's bearings • Polyester powder coating system • EQUIPMENT-FROM-TRAM-SALES

EQUIPMENT-FROM-TRAM-SALES

540 PTO • Multispeed Gearbox 540 rpm PTO •Rotor revolutions (4 speed): 178-201-227-256 •PTO shaft with slip clutch (1-3/8" Z6 tractor side yoke) •Side gear drive in oil bath •Universal three point hitch • Cat I II •Will offset 8" to the right •6 blades per flange (side blades are always mounted inwards). EQUIPMENT-FROM-TRAM-SALES

540 PTO • Multispeed Gearbox 540 rpm PTO •Rotor revolutions (4 speed): 178-201-227-256 • PTO shaft with slip clutch (1-3/8" Z6 tractor side yoke) • Side gear drive in oil bath • Universal three point hitch • Cat I II •Will offset 8" to the right •6 blades per flange (side blades are always mounted inwards). EQUIPMENT-FROM-TRAM-SALES

540 PTO • Multispeed Gearbox 540 rpm PTO •Rotor revolutions (4 speed): 178-201-227-256 •PTO shaft with slip clutch (1-3/8" Z6 tractor side yoke) •Side gear drive in oil bath •Universal three point hitch • Cat I II •Will offset 8" to the right •6 blades per flange (side blades are always mounted inwards). EQUIPMENT-FROM-TRAM-SALES

6 curved blades per flange mounted in spiral line (for normal soils) •Standard rotor (with end blades turned outwards) •Single or 4-speed gearbox made by SICMA with conical roller bearings • and oil level indicator •Side gear drive in oil bath with sight glass •Lower 3rd point hitches with adjustable width •Adjustable side skids to control the desired working depth •Parking stand •Cat 1 and 2 • 3 point hitch •PTO shaft size 6 (Eurocardan) with Slip Clutch protection •Polyester powder coating system •Box frame •"Long life"HD seal provided inside the rotor's bearings. EQUIPMENT-FROM-TRAM-SALES

6 curved blades per flange mounted in spiral line (for normal soils) •Standard rotor (with end blades turned outwards) •Single or 4-speed gearbox made by SICMA with conical roller bearings • and oil level indicator •Side gear drive in oil bath with sight glass •Lower 3rd point hitches with adjustable width •Adjustable side skids to control the desired working depth •Parking stand •Cat 1 and 2 • 3 point hitch •PTO shaft size 6 (Eurocardan) with Slip Clutch protection •Polyester powder coating system •Box frame •"Long life"HD seal provided inside the rotor's bearings. EQUIPMENT-FROM-TRAM-SALES

6 curved blades per flange mounted in spiral line (for normal soils) •Standard rotor (with end blades turned outwards) •4-speed gearbox made by SICMA with conical roller bearings • and oil level indicator •Side gear drive in oil bath with sight glass •Lower 3rd point hitch adjustable will offset to the right side •Adjustable side skids to control the desired working depth •Parking stand •Cat 1and 2 • 3 point hitch •PTO shaft size 6 (Eurocardan) with Slip Clutch protection •Polyester powder coating system •Box frame •"Long life" HD seal provided inside the rotor • EQUIPMENT-FROM-TRAM-SALES

Multispeed Gearbox 540 rpm PTO •Rotor revolutions (4 speed): 178-201-227-256 •PTO shaft with slip clutch (1-3/8" Z6 tractor side yoke) •Side gear drive in oil bath •Universal three point hitch • Cat I+II •Will offset 8" to the right •6 blades per flange (side blades are always mounted inwards). EQUIPMENT-FROM-TRAM-SALES

Multispeed Gearbox 540 rpm PTO •Rotor revolutions (4 speed): 178-201-227-256 •PTO shaft with slip clutch (1-3/8" Z6 tractor side yoke) •Side gear drive in oil bath •Universal three point hitch • Cat I II •Will offset 8" to the right •6 blades per flange (side blades are always mounted inwards) • EQUIPMENT-FROM-TRAM-SALES

Single speed gearbox with 540 rpm PTO •Rotor revolutions: 208 rpm •PTO shaft with slip clutch (1-3/8" Z6 tractor side yoke) •Side chain drive in oil bath •Universal three point hitch: Cat I II •Centre offset mounting is standard •6 blades per flange • EQUIPMENT-FROM-TRAM-SALES

EQUIPMENT-FROM-TRAM-SALES

PTO shaft central direct •Heavy duty side PTO shaft with cam clutch •Double side transmission with oil bath gears •Heavy duty barrel type bearings •Universal three point hitch • Cat. III •Swinging/rigid front bar hitches •6 blades per flange (side blades are always mounted inwards) •Shield spring adjusters •Hydraulic roller side adjusters •2 2 hydraulic adjuster for folding units lifting •Central eradicator •Small central share between the rollers •Transport width (folded): 8 1/4 ft. •Rear lights for transport •Double rear bonnet • EQUIPMENT-FROM-TRAM-SALES

Cat I • 3 pt. hitch •Single speed gearbox with 540 rpm PTO •Side chain drive in oil bath •PTO shaft with slip clutch •6 blades per flange •Outward turning blades • EQUIPMENT-FROM-TRAM-SALES

Cat I • 3 pt. hitch •Single speed gearbox with 540 rpm PTO •Side chain drive in oil bath •PTO shaft with slip clutch •6 blades per flange •Outward turning blades • EQUIPMENT-FROM-TRAM-SALES

Cat I • 3 pt. hitch •Single speed gearbox with 540 rpm PTO •Side chain drive in oil bath •PTO shaft with slip clutch •6 blades per flange •Outward turning blades • EQUIPMENT-FROM-TRAM-SALES

Cat I • 3 pt. hitch •Single speed gearbox with 540 rpm PTO •Side chain drive in oil bath •PTO shaft with slip clutch •6 blades per flange •Outward turning blades • EQUIPMENT-FROM-TRAM-SALES

540/1000 rpm PTO gearbox •Rotor revolutions PTO 540 rpm (3 speed): 133-162-220 •Rotor revolutions PTO 1000 rpm (3 speed): 181-246-300 •CONDOR spike rotor and cage roller with leveling bar •PTO shaft with slip clutch •1-3/8" Z6 tractor side yoke for 540 rpm PTO •1-3/8" Z21 tractor side yoke for 1000 rpm PTO •Side gears drive in oil bath •Universal three point hitch • cat. II •Swinging front hitches for leveling and balancing rough land •Shield spring adjusters •Pair of skids •Heavy duty barrel type bearings •"Duo cone" waterproof sealings • oil bath lubrication • EQUIPMENT-FROM-TRAM-SALES

Single speed gearbox with 540 rpm PTO •Rotor revolution 290 rpm •PTO shaft with shear pin (1" 3/8 Z6 tractor side yoke) •PTO shaft with slip clutch (optional) •Leveling bar (optional) •Round blade-holders •2 blades per rotor •Strengthened 6mm housing transmission • high strength steel •Cat. I (Models 1300-1500) • Cat. II (Models 1800-2000) •3 pt hitch •Hitch will offset •Side dampened protection •Depth control by 15" cage roller with pin adjustment • EQUIPMENT-FROM-TRAM-SALES

6 ft Blade • 11L-15SL Tires

3 Point Hitch • 540 PTO

540/1000 rpm PTO gearbox •Rotor revolutions 540 rpm PTO (4 speed): 175-214-262-143 •Rotor revolutions 1000 rpm PTO (2 speed): 324-356 •Slip clutch PTO shaft: 1-3/8" Z6 tractor side yoke with 540 rpm PTO 1-3/8" Z21 tractor side yoke with 1000 rpm PTO •Heavy-duty rotor hub •Side gear drive in oil bath •Universal three point hitch • Cat II •Offset front bar hitches •6 blades per flange (side blades are always mounted inwards) •Long multi-bends rear levelling doors with down-pressure double springs •Pair of skids • EQUIPMENT-FROM-TRAM-SALES

EQUIPMENT-FROM-TRAM-SALES

540 PTO

EQUIPMENT-FROM-TRAM-SALES

540 PTO

Multispeed Gearbox 540 rpm PTO •Rotor revolutions (4 speed): 140-174-215-266 •Slip clutch PTO shaft (1-3/8" Z6 tractor side yoke) •Heavy-duty rotor hub •Side gear drive in oil bath •Universal three point hitch • Cat I+II •Will offset 8" to the right •6 blades per flange (side blades are always mounted inwards) •Long multi-bends rear levelling doors with down-pressure double springs •Pair of skids •Oversize rotor Ø 22 in. with high strength steel flanges (B-super model only) •New flank for deeper tillage (B-super model only) •Hardened-steel antiwear skids (B-super model only). EQUIPMENT-FROM-TRAM-SALES

12 in Spacing • C-Shanks • Sweeps • Valmar Airflo 1620 Granular Package Serial Number - 16208232 • Single Shoot

540 PTO • EQUIPMENT-FROM-TRAM-SALES

Single speed gearbox with 540 rpm PTO •Rotor revolutions: 208 rpm •PTO shaft with slip clutch (1-3/8" Z6 tractor side yoke) •Side chain drive in oil bath •Universal three point hitch: Cat I II •Centre offset mounting is standard •6 blades per flange • EQUIPMENT-FROM-TRAM-SALES

Single speed gearbox with 540 rpm PTO •Rotor revolutions: 208 rpm •PTO shaft with slip clutch (1-3/8" Z6 tractor side yoke) •Side chain drive in oil bath •Universal three point hitch: Cat I II •Centre offset mounting is standard •6 blades per flange • EQUIPMENT-FROM-TRAM-SALES

Single speed gearbox with 540 rpm PTO •Rotor revolutions: 208 rpm •PTO shaft with slip clutch (1-3/8" Z6 tractor side yoke) •Side chain drive in oil bath •Universal three point hitch: Cat I II •Centre offset mounting is standard •6 blades per flange • EQUIPMENT-FROM-TRAM-SALES

Multispeed Gearbox 540 rpm PTO • Rotor revolutions (4 speed): 178-201-227-256 • PTO shaft with slip clutch (1-3/8" Z6 tractor side yoke) • Side gear drive in oil bath • Universal three point hitch • Cat I+II • Will offset 8" to the right • 6 blades per flange (side blades are always mounted inwards) • EQUIPMENT-FROM-TRAM-SALES

Multispeed Gearbox 540 rpm PTO •Rotor revolutions (4 speed): 140-174-215-266 •Slip clutch PTO shaft (1-3/8" Z6 tractor side yoke) •Heavy-duty rotor hub •Side gear drive in oil bath •Universal three point hitch • Cat I II •Will offset 8" to the right •6 blades per flange (side blades are always mounted inwards) •Long multi-bends rear levelling doors with down-pressure double springs •Pair of skids •Oversize rotor Ø 22 in. with high strength steel flanges (B-super model only) •New flank for deeper tillage (B-super model only) •Hardened-steel antiwear skids (B-super model only) • EQUIPMENT-FROM-TRAM-SALES

3 Point Hitch • 540 PTO

C Shanks • Sweeps

4 Bar • 3/8 in x 13 in Tines

9 Tines • EQUIPMENT-FROM-TRAM-SALES

11 Tines • EQUIPMENT-FROM-TRAM-SALES

540 PTO

7 Tines • EQUIPMENT-FROM-TRAM-SALES

Hydraulic Tine Adjustment • 5 Bar • 5/8 in x 27 in Tines • Carbides

Sillonneur raer steel Roller • Mitas tire 500/50-17 • French registration 2020

230 mm Spacing • Hitch Leveling • 68 discs • diameter 660 mm • 7mm • air brake system • Emopack Rear Roller 600 mm • 600/50-22.5 tires

2 Front Wheels Controls • 52 Discs • Steel Emopak Roller • Hydraulic Folding • Air Brake

530 mm Front Discs • 535 mm Rear Discs • Hydraulic Parking Jack • 40 Discs • Rear Roller 600 mm • 500/50R17 Tire

3 rangs • 4 meters • shear bolt protection • demo unit

15 Tines • 14 in Spacing • C-Shanks • EQUIPMENT-FROM-JL-HILL-FARMS

4 Tines • NS P S 3+1 D95 MP4WN-XS

24 in Notched Front Discs • 24 in Shallow Face Rear Discs • 9 in Spacing

12 in Spacing • Rear Hitch • Single Shoot • NH3 Package

Rear Roller Matrix • 28 Discs