Edmonton, AB ,CAN

To Fit Chevy • 7 ft Body Length • Bumper and Hitch Receiver

Tie Off Lanyards • Retractable Lanyards

10 ft. Lengths • Qty 2 3 in. Camlock Artic Flex Suction Hoses • 30 ft. Lengths

Filter

Approximately 149 in x 149 in x 126 in

Various Hitches • Road Side Emergency Kits

(2) Misc Fabco 170 Drop Box

2 in x 50 ft • total 700 ft

1995 US EPA Label • Honda 1 Cylinder Gasoline Engine • 4.5 kVA •/ Rated Single Phase Output • 120 V / 240 V Rated Voltage

Quantity of -6" Lay Flat Hoses • Quantity of 28-4" Lay Flat Hoses • Quantity of 1-4" ball valves with T Camlock Fittings • Quantity of 10 Sections of 4" Suction Hose

Tie Off Lanyards

Filter

Honda GX240 Gasoline Engine

Tie Off Lanyards

Filter

(4) Pallets

Stand

120/277v 12000 lumens

To Fit GMC Yukon

hydraulic line

6 in • 10 in and 12 in Bits

To Fit Cat Dozer D6M & D6N • Part Number 121-0828

Set of 2 • 10 in 900 ANSI Engineered Test Heads with a Max Operating Pressure 2160 Psi. Designed to CSA Z662-11. These Test Heads have an engineered transition on them

Set of 2 • 10" 900 ANSI Engineered Test Heads with a max operating pressure 2500 Psi. Designed to CSA Z662-11. These Test Heads have an engineered transition on them

Set of 2 • 10 in 900 ANSI Engineered Test Heads with a Max Operating Pressure 2500 Psi. Designed to CSA Z662-11. These Test Heads have an engineered transition which is a 45 degree elbow and 600 Ansi Flange

Set of 2 • 16" 900 ANSI Engineered Test Heads with a Max Operating Pressure 2160 Psi. Designed to CSA Z662-11. These Test Heads have an engineered transition on them

Set of 2 • 16 in 900 ANSI Engineered Test Heads with a Max Operating Pressure 2160 Psi. Designed to CSA Z662-11. These Test Heads have an engineered transition on them

Set of 2 • 12" 900 ANSI Engineered Test Heads with a max operating pressure 2500 Psi. Designed to CSA Z662-15. These Test Heads have an engineered transition on them to make them usable on 8 in

Set of 2 • 12 in 900 ANSI Engineered Test Heads with a Max Operating Pressure 2500 Psi. Designed to CSA Z662-11. These Test Heads have an engineered transition on them